Easy Solar Solutions Private Limited
Railway Road, Muradnagar, Uttar Pradesh
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 10 Unit |
| Charge Controller type | PWM |
| Application | Solar Electrification |
| Battery Temperature Compensation | -4mV to -5mv/C/Cell |
| Operating Temperature | -20 deg to + 50 deg C |
| Storage Temperature | -10 deg to + 60 deg C |
| Uses | Indoor/Battery Charging using Solar Module |
| Fixing | Wall Mounting with Screws |
| Connectors | Heavy duty terminal connectors |
| Dimension | 170x100x55 mm (LxWxH) |
| Box | MS Sheet box with non weather proof coating |
| Solar Module Size | 12V-150Wp |
| Indication | LED (charging, low battery warning, low battery & battery full charge, Over Load) |
| Nominal System Voltage | 12V |
| Charging Current Solar | 10A |
| Load Current | 10A |
| Charge Controller Efficiency | 95.00% |
| Idle Consumption | 10mA |
| Protections | Against module reverse current flow, Reverse Battery & Overload |
The Solar Charge Controller, which protects battery from overcharging or excessive discharge are the essential component of Solar PV systems. Easy Solar introduces professional Solar Charge Controllers using the most innovative & state of the art technology.
The Solar Charge Controller uses P.W.M charging technology, So that as the battery reaches full charge, the PWM pulses Slower, gradually tapering OFF the Charge.Pulsing is good for the batteries since it gently mixes the electrolyte, preventing, stratification & sulphation low voltage disconnect protects the batteries from severe discharge by shutting OFF loads before the battery voltage drops to damaging levels.
Temperature Compensation adjusts the set point voltages according to the ambient temperature.
Features of PV Modules:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Charge Controller type | PWM |
| Uses | Indoor/Battery Charging Using Solar Module |
| Operating Temperature | -20 deg to + 50 deg C |
| Storage Temperature | -10 deg to + 60 deg C |
| Battery Temperature Compenstaion | -4mv to -5mv/ deg C/Cell |
| Solar Module Size | 24V (1200W) / 48V (2400W) |
| Indication | LED (charging, low battery warning, low battery & battery full charge, Over Load) |
| Nominal System Voltage | 24V/48V |
| Charging Current Solar | 40A |
| Load Current | 40A |
| Charge Controller Efficiency | 95.00% |
| Idle Consumption | 10mA |
| Protections | Against module reverse current flow, Reverse Battery & Overload |
| Fixing | Wall Mounting with Screws |
| Connectors | Heavy Duty Terminal Connectors |
| Dimension | 215x205x65 mm (LxWxH) |
| Box | MS Sheet box with non weather proof powder coating. |
Product Details:
| Minimum Order Quantity | 100 Piece |
| Charge Controller type | PWM |
| Application | Solar System Controller |
| Uses | Indoor/Battery charging using Solar Module |
| Operating Temperature | -20 deg to + 50 deg C |
| Storage Temperature | -10 deg to + 60 deg C |
| Battery Temperature Compensation | -4mv to -5mv/ deg C/Cell |
| Solar Module Size | 12V-150Wp / 24-300Wp |
| Indication | LED (charging, low battery warning, low battery battery full charge, Over Load) |
| Nominal system Voltage | 12V/24V Automatic Select |
| Charging Current Solar | 20A |
| Load Current | 20A |
| Charge Controller Efficiency | 95% |
| Idle Consumption | 10mA |
| Protections | Against module reverse current flow, Reverse Battery Overload. |
| Fixing | Wall mounting with screws |
| Connectors | Heavy duty terminal connectors. |
| Dimension | 185x130x85 mm (LxWxH) |
| Box | MS Sheet box with nonweatherproof powder coating. |
